Where are pattern and Song Mode state in the Digitakt II project settings (0x54)?
Offsets (decoded payload)
- 11: live/current pattern pointer or closely related playback pointer. Changed while a song advanced (0x0C → 0x10), matching the pattern the device reported.
- 18: selected Song, zero-based (0 = Song 1 … 15 = Song 16).
- 19: native Song Mode enabled (0/1). Stable while playback advances.
Found by diffing whole-project dumps: all 128 pattern+kit frames were byte-identical between a stopped project and the same project with Song 1 running; only the 0x54 frame differed, at offsets 11 and 19.
Reliable sequences we used
- Song Mode → pattern A01: read fresh 0x54, set offset 11 = 0 and offset 19 = 0, write the frame, read back and confirm 19 = 0, then send Program Change 0, then confirm the working pattern is A01.
- Pattern → Song 1: read fresh 0x54, set 18 = 0 and 19 = 1, write, read back.
- Song 2: 18 = 1, 19 = 1.
Writing offset 11 alone did not change the playing pattern while Song Mode was on. Song Mode has to be switched off first; see Program Change and pattern mode.
Caveats
- Always start from a fresh read; never write a stale 0x54 frame back.
- When a project was committed to +Drive, the device normalized 32 bytes of project settings to zero (pattern and kit bytes unchanged). Re-read after any commit.
- Song row lengths were not found in 0x54 or in the pattern header.
FAQ
How do I switch the Digitakt II out of Song Mode over MIDI?
In our tests: write the 0x54 frame with offset 19 = 0 (fresh read first), verify, then send Program Change.
Is the Song index zero-based?
Yes, offset 18 = 0 selected Song 1.
Observed on / Status: Hardware-verified on Digitakt II OS 1.16 (October 2026). Unverified on later OS versions; offset 11 semantics are a strong indication, not proven.
Deutsch
In den dekodierten 0x54-Projekteinstellungen (17.408 Byte) ist Offset 11 der laufende Pattern-Zeiger, Offset 18 der Song (nullbasiert) und Offset 19 der Song-Modus (0/1). Erst Song-Modus aus, dann Program Change.
Related
- Why does Program Change not switch patterns on my Digitakt II (Song Mode)?
- What does a Digitakt II SysEx message look like?
- How does Elektron's 7-bit SysEx encoding work?